If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I would like to make a clarification .... NO AMOUNT COST THE INTEGRATED ................ BUT HOW MUCH COST BE LOADED IN OPERATING IN THE INTEGRATED WITH THE RIGHT CODE HEX ... .....
I have read the 133 pages, and to get the version v5 hex, but the version v6 you have to send an email to your administrator, and pay for the already scheduled atmga8
I have also the scheme and other listings of version 5 and program designer says on its website that the differences are minimal, the v5 is going well and that I'm going to build because of that we have the hex
The PCB is over..........we go for the next step[ATTACH]33331[/ATTACH][ATTACH]33332[/ATTACH][ATTACH]33333[/ATTACH][ATTACH]33334[/ATTACH][ATTACH]33335[/ATTACH]
What would be the version of hex you are using on this board?
The PCB is over..........we go for the next step[ATTACH]33331[/ATTACH][ATTACH]33332[/ATTACH][ATTACH]33333[/ATTACH][ATTACH]33334[/ATTACH][ATTACH]33335[/ATTACH]
Photo and perfect ... but mounting and the PCB so that it can develop the other fellow?
Hi i made this detector, but have a problem, when turn on have sound, after ready detector have tik sound but when metal is detected no detection sound only tik sound, anyone help me.
Comment