Circuit for Arado 150 or similar

[satdaveuk]

Hi
Customer dropping this into the workshop this weekend
I need a circuit, and any other tech imformation, Like to turn this around in a couple of days because hes elderly and the only machine he has.
Maybe the 120b is similar so send me that, its better than fault finding blind as you all know.

Many thanks in advance

Dave

[Qiaozhi]

Hi
Customer dropping this into the workshop this weekend
I need a circuit, and any other tech imformation, Like to turn this around in a couple of days because hes elderly and the only machine he has.
Maybe the 120b is similar so send me that, its better than fault finding blind as you all know.

Many thanks in advance

Dave

Unfortunately I do not have an Arado schematic. I don't think one exists. At least, not outside of the manufacturer.

[kt315]

Maybe the 120b is similar so send me that

Dave... there is Search pimpka above... look ahead... but I always on service you know it... so repeat is not charge for me... Arado 120b schematic http://depositfiles.com/files/l23eh56y0

have a nice day

[satdaveuk]

Dave... there is Search pimpka above... look ahead... but I always on service you know it... so repeat is not charge for me... Arado 120b schematic http://depositfiles.com/files/l23eh56y0

have a nice day

Thanks your a star let you know how it goes, did these work anygood do you know, looks a bit relic works on 4.5khz with tunning cap on board, saying that the 320 works on the same frequency and still uses anolog meter, that sells out at £1,295 and suposed to be a real contender in top range md market here in uk

[ivconic]

Nothing wrong with this "Arrado", trust me!
It is deep enough, but not so sensitive on smaller items!

[Qiaozhi]

Dave... there is Search pimpka above... look ahead... but I always on service you know it... so repeat is not charge for me... Arado 120b schematic http://depositfiles.com/files/l23eh56y0

have a nice day

I thought that might happen.
You only have to post that you don't have a copy, and you don't think anyone has it, in order to be proved wrong.

By the way, I didn't find it using the Geotech search function. Just lots of people looking for a schematic, and Sean saying he thought he may have a copy somewhere.

[nakky]

Nothing wrong with this "Arrado", trust me!
It is deep enough, but not so sensitive on smaller items!

It is deep and sensitive enough ,for me.

GRt Nakky

[satdaveuk]

Nothing wrong with this "Arrado", trust me!
It is deep enough, but not so sensitive on smaller items!

wouldnt say no

[satdaveuk]

have any of you here of the 150 the customer double check and he says it is, i didnt think there was a 150 made, maybe it was limited addition one of those types with a forty year life span

[satdaveuk]

I thought that might happen.
You only have to post that you don't have a copy, and you don't think anyone has it, in order to be proved wrong.

By the way, I didn't find it using the Geotech search function. Just lots of people looking for a schematic, and Sean saying he thought he may have a copy somewhere.

well also a big thank you to sean tell im very greatful and if he requires a good copy of the TGSL i know where i can get one

[Max]

Nothing wrong with this "Arrado", trust me!
It is deep enough, but not so sensitive on smaller items!

right!
size matters, but you forgot to write that the assembly must be rigid enough for the thing to be usable and rock steady on the field!

[satdaveuk]

Arado 150

Just delivered today for repair infact its a 130 which was produced in 1986 works on 5.5khz, its the last one they produced until 2009 which is the 320 unlike the 120b which works on 4.5khz which was produced in 1978.
So actually im looking for a circuit for the 130, anybody?
Also the other one that he gave me infact is not a whites, its a Fisher M-Scope 1265x, looks quite a nice build, dont know if it works yet not tryed it.

[Manjula]