Announcement

Collapse
No announcement yet.

Surf PI Pro

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Problem solved ... got my soldering iron and went over each solder point ...
    must be cold joint ... but I don't get it why I did get normal operation ...

    OK, now, must do some fine tuning in quiet room ...

    have another board to do ...

    Comment


    • Well done, we all learn from group problems.

      Comment


      • Thank you for your help in solving this case...

        I think I have about 25-26 cm on 1 and 2 EURO coin
        about 20 cm for 14K gold ring (bigger one) and 13-14 cm on small gold ring
        delay pot is on 4.5k

        Comment


        • I am pleased you have found the problem, I get them too. Good hunting

          Comment


          • How is that?
            Attached Files

            Comment


            • Hi all,

              Does anyone have the current list of items to Surfmaster PI PRO and SURFXX?

              Comment


              • hello etwert,

                can you convert the eagle files into another format (gerber? sprint layout)
                cant open these files with eagle error message
                was only able to extracxt top ond bottom layer for the copper tracks

                but not silkscreen

                but hole thing looks interesting

                Comment


                • Eagle 6.3.0 opens files without problem!
                  In PDF format OK?
                  Attached Files

                  Comment


                  • ok thanks Toros

                    an can you convert also the schemtic for this conecept to pdf
                    is is possible to export the eagle pcb file to gerber?
                    top
                    bottom

                    so i could redraw it very fast with sprint
                    with partlist / bom

                    Comment


                    • Sch. in PDF
                      Attached Files

                      Comment


                      • [QUOTE=bernte_one;205675]ok thanks Toros


                        is is possible to export the eagle pcb file to gerber?
                        top
                        bottom

                        I do not know how to do it!

                        Comment


                        • Toros, maybe if you follow the instructions of EAGLE. I have not done it. Use SMpro12F683bottom.ps, SMpro12F683top.ps, laser printer and laminator.

                          Comment


                          • Originally posted by Toros View Post
                            I do not know how to do it!
                            Here is "How To": http://www.tiaowiki.com/w/How_to_exp..._at_youpcb.com
                            http://www.eurocircuits.com/Cadsoft-...ion-guidelines

                            Comment


                            • and the Gerber files:
                              Attached Files

                              Comment


                              • Thank you very much Morse Han! You did the main work.
                                Great!
                                It remains for me only to discover detailed instructions.

                                Comment

                                Working...
                                X