My Digital Pulse detector Delta Pulse 3

[drifterall]

Hello to all!

Unfortunately Pasha is right....

All the magic is in hex file. If he make it public a lot of people will copy it for commercial purpose!

I also want the hex but i understand him. Also he has not problem to send the pic.

I hope that he will help us to make a very good detector!

About the coil: it has the same Ohm resistance and μΗ (uH) with delta pulse 2? if you have time tell me the differences!

PS: Sorry about my poor English!

[6666]

I can attach demo software.

Pasha has offered us some demo software,
could you attach it here please Pasha
thanks

If you want the full hex contact Pasha
He will post you a Pic,

[Investigator]

I made delta Pulse 2, but did not want to work. Hear the sounds and it fluctuates but is not sensitive to metal. When we go through the searching coil is no sound or no reaction. Send me a scheme by which I could make Delta Pulse will work with labels- integrated circuits and tranzistors ex.BC557 A or BC557C , I DO NOT WANT TO DETECTOR WITH LCD DISPLAY I WANT TO DELTA COMMON ANALOG PULSE METAL DETECTOR.Please send me corect shematic for delta my mail is [email protected] Thank you in advance.Investigator

[6666]

Investigator
you would probably be better off making your post in the delta pulse thread

see here
http://www.geotech1.com/forums/showthread.php?t=8003

[Pasha]

Hi,

Thank you all,

I sent a pic with full hex to some different country on the last week. I didn't take any money for softwere. I took the money for only shipping cost and empty pic. Thank you all for understanding. Some people made this detector on the Turkey and I have made 5 detector until now. All detectors are working goodly. I have sent all detectors for only materials costs . I want to make a good sharing project. I doesn't want to make a commercial project. Because I am making a commercial project on the same time. But this project is not commercial. My commercial project have same circuit and different PCB (SMT).

Thank you all for understanding. I can send the pic with full hex to all country.

Regards.

[Pasha]

Also,

I didn't understand that how can I use PM in this site. So I couldn't send reply to a lot of PM. Could you send me e-mail. My mail: teknolojiekibi@gmail.

Regards.

[satdaveuk]

give up

I give up, pasha promised me hex files for this project to my private email address which is [email protected] and yet again did not recieve anything, maybe things are not as they appear to be on here, im moving on to the minipulse 3 it seems to be in order with hex files incl.

Regards

[claudio1084]

excellent information

Hi,

I have developed a digital detector. I want to hear your opinion about my design. I will attach all of documets soon. I attached schema and some pictures.

Wideos

http://www.youtube.com/watch?v=MzFME...layer_embedded

http://www.youtube.com/watch?v=AaT0J...layer_embedded

http://www.youtube.com/watch?v=zLGcf...layer_embedded

http://www.youtube.com/watch?v=yPHmu...layer_embedded



Link:http://www.teknolojiekibi.com/yeni/i...p?topic=3797.0

Not: You should member for see all document in this link.

excellent information thk.

please if someone can send me hex files pliiiiiissssssssss, thank you very much from Chile

my mail: [email protected]

[6666]

claudio1084 contact Pasha he will send you a pic with full hex
he only charges for postage and blank chip

[alipcpmc]

Hex File

hi my Friends. sorry my english language not good.
I do not See Hex or Program File for PIC18F4520
Please Upload or Send to me. Thanks
I will test with similator and I will Survey.
I Will show to all Results. Thanks
My Mail [email protected] or [email protected]

[tjmlena]

I would like to build it, but at least I need english instructions

[Miata]

Hi,

today I finished my Delta Pulse 3. It was tricky without an english (or german) manual. Turkish is not my motherlanguage.

I made any little changes. T16 (BC557) seems to be in wrong direction (180°) on the PCB.
I substitute with BS250. I have no 74VHC4051, I use an ordinary 4051 also a 4094.
The transistor IRF740 gets very hot, I spend a cooling plate. The discrimination mode is very poor. Perhaps I made an error. The sensitivity is good. I can detect a 1 Euro coin about 21 cm with "factory settings".

Regards
Jürgen

[pigeon]

Hi,

today I finished my Delta Pulse 3. It was tricky without an english (or german) manual. Turkish is not my motherlanguage.

I made any little changes. T16 (BC557) seems to be in wrong direction (180°) on the PCB.
I substitute with BS250. I have no 74VHC4051, I use an ordinary 4051 also a 4094.
The transistor IRF740 gets very hot, I spend a cooling plate. The discrimination mode is very poor. Perhaps I made an error. The sensitivity is good. I can detect a 1 Euro coin about 21 cm with "factory settings".

Regards
Jürgen

HI MIATA

GOOD WORKS

BEST REGARDS

[volcano]

thank you MR PASHA
I think that it is a good project . please send me the HEX file

[email protected]

[Pasha]

Hi All,

Sorry for late reply but I am very very busy. I haven't got enough time.

Miata, this is great work. But discrimination should be good. I think you couldn't make calibration. Calibration should be good. You can see some information on the my videos about discrimination. I attached links of last my videos. I attached a picture about calibration signal. You should see this signal form on the D6 7th pin.


For other friends, I can send pic that is programmed with full hex. I didn't want money. I need only shipping cost and cost of blank pic. I will develop this project with your comments. I want to make a great share project with all comments.

http://www.youtube.com/watch?v=sEJIm...1&feature=plcp

http://www.youtube.com/watch?v=qe8e8...2&feature=plcp