Tweet
If people are going to use Conathane EN-9 for casting
there Piezo tranducers you may want to look at Polytek
81-90 or 14-70 as a substitute.
The about have a lower viscosity than EN-9 and should
be easier to deal with then the "taffy" like EN-9
which I suspect is used with a pressure injection system. Polytek 610-599-8620.
I have two arrays which will be embeded soon and I am
doing some research into the problems in a short run
job with "basement" tools.
Good luck....
there Piezo tranducers you may want to look at Polytek
81-90 or 14-70 as a substitute.
The about have a lower viscosity than EN-9 and should
be easier to deal with then the "taffy" like EN-9
which I suspect is used with a pressure injection system. Polytek 610-599-8620.
I have two arrays which will be embeded soon and I am
doing some research into the problems in a short run
job with "basement" tools.
Good luck....