Just replaced my lcd sreen as the back light was not working.
I don't know what happened but when I turned the unit back on I
got a pulsing high pitched whine and rubbish displayed in the screen.
I disconnected the EL backlight wire and removed the dc/dc converter and transistor,
and got a normal welcome screen.
I could scroll up but not down.I got the usual beep as I pressed the keys.
The unit would not go into the Ground balance sequence.
Strange that I get the usual beep as I press the keys ,but nothing happens.
Any clues?
Cheers
John
I don't know what happened but when I turned the unit back on I
got a pulsing high pitched whine and rubbish displayed in the screen.
I disconnected the EL backlight wire and removed the dc/dc converter and transistor,
and got a normal welcome screen.
I could scroll up but not down.I got the usual beep as I pressed the keys.
The unit would not go into the Ground balance sequence.
Strange that I get the usual beep as I press the keys ,but nothing happens.
Any clues?

Cheers
John
Comment