Tweet
Can anybody mail me a full size layout for the PCB of EE Treasure Hunter ( Stuart1 ) . The layout in the article has to be enlarged to 125% in order to get the right size . Because of the many smudges on the articles layout it is impossible to get a nice sample . Kees
-
-
Re: PCB copy
I must apologize - I'm the one who shrunk the layout that is in the PDF. I usually go to pains to keep the PCB artwork at exactly 100%, I must have had my brain in neutral that day. Here is my scan of the copy of the original article's PCB, it is almost exactly 100%. I can try to get a higher res scan (maybe 600dpi) but I suspect my article copy will still limit the quality.
- Carl -
Re: PCB copy
Carl . Thank you but this scan runs off the computerscreen . Must be about 600% . If nothing else I have to go through the trouble of making a new print lay-out . Like with that PIDX . Ah well can't winn them all . Thanks anyway . KeesComment
-
Easy...
Just save the JPEG image to your computer, then print it at 300dpi. It should be just right.
Monitors always blow things up because of their low DPI resolution.
- CarlComment
Comment