Excalibur Pots

[otlew]

Does anyone know of a source for the Excalibur Pots? I don't have a schematic so I am not certain of the values for all the pots but I suspect they are the same 10K carbon linear, body diameter is 12.5mm/1/2", 6mm thick, total height including shaft is 21.5 mm/ 7/8".

Any guidance would be appreciated. Suggestions please.

Thanks,

otlew

[ApBerg]

http://www.youtube.com/user/oldbeechnut/videos

You can ask an expert..

[otlew]

Thanks,

I will email Joe and see if has a source for the pots.

[otlew]

Need to correct the stated value, 100K pots.