IDX Pro VDI connection points for other detector models

[bernte_one]

hello

some days before i tested the idx pro vdi at my igsl musketeer
something that i want to do since a long time
results are really nice it makes fun to swing that thing

the next what come to my mind was to use this as backup modul
for tesoro cibola and compadre so why not try

i think at compadre i could find the right points but cibola is an other thing

the next will be other models
my old gc1023

so if anyone has tested vdi at other machines why not collect some connection points here

write your detector model
name the connection points
X / name of ic and place on pcb / pin number
y / name of ic and place on pcb / pin number

regards

[Sargon]

Hi bernte_one,

let's start to contribute to this thread with an entry for the Deeptech Vista Mini (German Edition):

Connections:

Vcc (+12 V): thick brown cable
Gnd: thick blue cable
X: IC=AD8664 (looking at the component side it's the topmost on the left, just left of those four 47n capacitors), Pin 14
Y: same IC, Pin 8

Characteristics (value unit is V):

Mode	X	Y
No Object, Disc = Min	4.1 - 4.3	4.3 - 4.5
No Object, Disc = Max	4.1 - 4.3	4.7 - 4.8
.50 BMG shell (distance ~ 1 cm)	~ 3.0	~ 2.0
Range	0.4 - 5.0*	0.4 - 5.0*
Range for smaller objects up to BMG	3.0 - 4.5	2.5 - 5.0
Voltage change for non-ferrous objects	drops	drops
Voltage change for ferrous objects	drops	rises
*May exceed 5.0 if object is very large and distance very small

Greetings and happy hunting!

Sargon

[bernte_one]

Hello Sargon,

many thanks for your support here and at the other constructions sides.
We are only at beginning now, and i hope that you can share your wisdom here too.

kind regards bernd

[Altair]

Hello bernte_one,
Can you explain something about connections between ISGL and VDI you write above?
I am interested to add one VDI to my IGSL Musketeer, with a little display that will show only two big digit. My idea is to use the Nokia display of a 5110 mobile phone.