Does anyone have any information on using a PLC to build a PI metal detector?
The PLC is a ABB PM564-T-ETH
Onboard I/Os in PM564 CPUs
- 6 DI 24 V DC
- 6 DO (24 V DC, 0.5 A max transistor outputs)
- 2 AI (voltage 0 ... 10 V)
- 1 AO (voltage 0 ... 10 V or current 0 ... 20 mA / 4 ... 20 mA)
Functionality
The PLC is a ABB PM564-T-ETH
Onboard I/Os in PM564 CPUs
- 6 DI 24 V DC
- 6 DO (24 V DC, 0.5 A max transistor outputs)
- 2 AI (voltage 0 ... 10 V)
- 1 AO (voltage 0 ... 10 V or current 0 ... 20 mA / 4 ... 20 mA)
Functionality
Digital inputs | 6 (24 V DC), can be used as source inputs or as sink inputs |
Interrupt inputs | 4 (DI0 ... DI3), configurable |
High-speed counter | 2 (DI0 and DI1), configurable |
Digital outputs | 6 transistor outputs (24 V DC, 0.5 A max) |
PWM outputs | 2 (DO2 and DO3), configurable |
Analog inputs | 2, voltage input 0 ... 10 V DC, can be configured as digital inputs |
Analog outputs | 1, voltage output 0 ... 10 V DC or current output 0 ... 20 mA / 4 ... 20 mA |
LED displays | For signal statuses |
Internal power supply | Via CPU |
External power supply | Via CPU |
Comment