Blisstool Production LIne......

[multieagle]

Anything on the market? Did you test it against Nokta Velox One? Show me those independent test.

But detector with 13 controls? Did you notify it to Guinness? It should be very competitive for weirdest construction record.

There's just me and the Bliss Beast out in the field. It takes about 5 minutes to set it up, and then there's little that can touch it in the open field, or on the wet, sandy beach. It is GREAT returning to your roots, and knowing you have the one of the BEST detectors in hand, bar none. Sure, you're right, there are things other detectors will do better. You don't see me going on their forums, or posts and knocking them. YOu guys seem to take delight attacking from a position of ignorance, or outright prevarication. I'm certain readers can do their own research and draw conclusions from actual experience, or honest to goodness tests.

[multieagle]

But I recognized that the coil-plastic is a problem.
If you bend it only 0,2mm it will cause already a signal at highest sensitivity.

The used coil-plastic breaks too fast and it is not hard enough.
And afaik Blisstool doesn't offer coil protection covers.

The coil stem connectors also should be designed different.
.

???? I have no experience with the coil problems you mention. Nor have I seen any similar remarks elsewhere. My coil would have to be held in a vice to bend it. Would probably break before bending (as would any coil). Can you give me an example (show the damaged coil), or direct me to a site that has posted such information, with documentation/images?

Thank you for the other comments.

[sinclairuser]

Sorry Carl, depth again! but depth is not everything, a lot of hobby detectorists have no knowledge of electronics too many controls put them off!, also land permissions can be hard to find, if detecting is your hobby your dont want to find everything the first day, you can detect the same field for years and find nothing but trash, and all of a sudden after a ploughing you start getting good stuff!.
i guess what i'm trying to say is that lots of different factors come in to play when choosing a detector i used the XP as an example because for a lot of detectorists XP is the obvious choice.
I would not be mine, i have my own delusions about which detector is best, i'm glad those who bought the blisstool are happy its obviously the detector for you! and thats what its all about.
multieagle - i wasn't trying to be rude, i only posted in the first place because someone was claiming some sort of fraud again, and i wont have that I have held one, they are real they are not cheaply made at least they feel well made, i also like the audio but as my hearing is non standard that does not mean much, but i stand by the weight issue too heavy for me.
funfinder - have you seen the youtube video vacuum forming turkish style?, maybe a modification of that could make covers at least?.
p.s. the gansta quip was meant as a joke.

[Henrikras]

Hi guys... I am allso Very happy with my Blisstool, and dont think so much about how it is manufactured, small factory, garage or by machine. I allso think that no matter what Detector you got, more or less there will Allways Be a issue or something there could Be made different. The important part to me is; "are you happy and do you enjoy your hobby" - I do that with my Blisstool, and because the new owners will get a lot of improvement, I am sure that they will love it allso. (New improvement is to Be found at the UK forum)
If you got a Blisstool and you got a good idea to make it better, please send a mail to Blisstool... Maybee your idea could help to make more improvement and that will help new owners in future, instead of putting a lot of negative words in the forums.
If you do take the step to ordre a Blisstool, the waiting is not so long anymore, and there is so much help to get learning to tame it.
And by the way! You dont have to go max depth everytime all the time... with the Bliss. It is awesome even at 50% of its limit.
Ps. A good friend to me just found a spread hoard of Roman coins, and he enjoyed findding many of the deep coins with his Bliss, after he and the museum had walked hours after hours with a Deus and a CTX. After that exsperience he would never sell his Blisstool.
Take care guys.
Henrik

[WM6]

After that exsperience he would never sell his Blisstool.

This can be true, cause no one will buy it.

[kt315]

After that exsperience he would never sell his ---put need word here

---blistool
---deus with very big TDD coil (Triple DD)
---x-terra 705
---mega deeper schematic you do still never see
---QED with automatic ground filter
---last superior cosmic vision earth penetrator tech from China

etcetera

[Henrikras]

WM6 - I just said to my good friend that Geotech is a forum where People are Saying things in respect to others opinions. Now I have to say Sorry to him.
If you had said... I tryed it, No good fore me and why, or what there is behind, I still had the respect to you, but not anymore.
If I did misunderstand you, and it was a joke "Sorry to you" But I dont think so.
Last word from me.
Henrik.

[WM6]

This is how virtual people are talking about real detector. Then detectors become goal, virtual idol, and not just a means to an end.

[slomobi]

http://www.kibertron.com/index.php?l...m=page&page=41
http://www.kibertron.com/index.php?l...m=page&page=41
http://www.kibertron.com/index.php?m...on=show&pid=40
http://www.kibertron.com/index.php?m...on=show&pid=11

1. Romtech-3 is a real electronics factory in Bulgaria but is not BLISSTOOL factory
2. Romtech-3 not owned by Ahmed and he has no involvement in the management of this company.
3. BLISSTOOL and Ahmed not have factory, BLISSTOOL detectors are produced in a garage, therefore have a long wait of 4-8 weeks, he produces annually about 200 metal detectors.
4. Kibertron Project is another lie, from 2002 to 2013 the whole project is only a computer simulation

[multieagle]

Anyone can make wild accusations, without proof other than their word. You accuse yet offer no evidence, only hearsay and your own slanted attack. Why are you so riled up against Blisstool? Do you have your own business? Maybe you are a wannabe that never made it? Or just sour grapes because someone has produced a superior machine, that WILL STAND UP AGAINST ANY MACHINE (note I DID NOT say better, or best). You are like a reporter for the defunct National Enquirer in the USA. Say anything, blend truth with fiction, but offer only innuendo as proof. Bring us the pictures of Blisstools being produced in a garage, proof that the Kiberton Project is only a computer simulation, proof that Ahmed does not own the machinery demonstrated in his video. Until then you are just another blowhard, working some manner of grudge.

[Overtheedge]

Count me among those totally fed up with this thread.

Multieagle makes claims like he is a dealer defending his turf and demands proofs that blah, blah, blah.
Yet he fails to present any proof or evidence supporting his claims.

A few questions.
Do you live in Bulgaria?
Have you visited the factory?
Are you a dealer?

Like it, hate it, I don't care. Just be honest about your opinion.
And let others have their opinion too.

Until then you are just another blowhard,

So far multieagle has convinced me NOT to consider BlissTools. Quality needs no defense.
eric

[ODM]

It would be nice if people could talk about manufacturers in a civil manner, or if they can't - maybe stop posting about them altogether, focusing on technical topics and projects alone?

[Qiaozhi]

It would be nice if people could talk about manufacturers in a civil manner, or if they can't - maybe stop posting about them altogether, focusing on technical topics and projects alone?

I agree.
This thread is now closed.