Help for my minelab Sovereign xs2pro

[lainlain83]

Hi,

I've a problem with my sovereign xs2pro rev1.1 whith a coil bbs1000, a machine buy on the web. : Froncement de sourcils:
It works but power is very low, 10cm only for a coin, and there is no soundtrack threshold.

What do you think about this? Help me please....

regards
Alain (France)

[kt315]

hi, try to find another coil, connect it and inform about result.

[lainlain83]

hi, try to find another coil, connect it and inform about result.

Hi,

Yes, it's perhaps the coil, I'm going to find another coil...

Thanks

[Ron from Michigan]

Could be the 1000BBS coil,I always found this coil noisy and didn't have the depth of the 800 or 1000 Tornado.So was it the coil?

[lainlain83]

hi,

no it wasn't the coil, but it was an internal problem, it was only a defective weld... it work now...

see you soon,

Alain

[Ron from Michigan]

Alain,the Sovereign XS-2 is one of my favorite models except for the pressure battery clip system.Usually I change mine to the older 2.4mm plug in,less problems and easier to build new battery packs.Good you solved your problem.HH Ron