LUGATEK QUESTION

[Schatztaucher]

Hi at all,

i want to build the Lugatek-VDI...can somebody tell me something about the performence? is it better like the IDX-VDI? are there any problems which one must pay attention? and what i have to do with the jumper?

regards, Marc

[Schatztaucher]

no one knows anything?
pity.......
I'll have to try out something

regards,marc

[tjmlena]

This kit is only for VLF

There is conection to few detectors, not all supported

[Ropcsika]

Hi at all,

i want to build the Lugatek-VDI...can somebody tell me something about the performence? is it better like the IDX-VDI? are there any problems which one must pay attention? and what i have to do with the jumper?

regards, Marc

[ATTACH]25488[/ATTACH]

Look at this: http://www.youtube.com/watch?v=uaJNBRG0aQM

This is mine, can be programmed the atmega via a jumper.

Good work, good sensitivity

[Schatztaucher]

Many thanks Ropcsika! then know a bit more. your video I know of course already;-) great work!! can you explain a little more detail? it means I do not need the jumper when I program the atmega outside the board?

best regards, marc

[Ropcsika]

Many thanks Ropcsika! then know a bit more. your video I know of course already;-) great work!! can you explain a little more detail? it means I do not need the jumper when I program the atmega outside the board?

best regards, marc

When you programing the atmel outside the board do not need the jumper.

1, pogramming the ic outside the board
2, put into the atmel into the ic socket on vdi board
3, and done..

[bernte_one]

hello schatztaucher

we had this project in detektorforum
source code was hacked- no more on off switching limited

also it is described how to connect to a vista metal detector (i think it was the smart)

lugatek vdi wokrs good
look for videos from firebox on yt

kind regards

p.s.

if you going to start this project
i could etch some pcb boards
but i need somebody who write the controller for me

[Nimmermehr]

it was the vista smart...
http://www.youtube.com/watch?v=mlA6sLXWh-o

[bernte_one]

hello nimmermehr

it seems to get serious now

why not do some lugatek vdi in a diy kit ?

i could etch some boards and collect parts
but someone should flash the micro controller

[Schatztaucher]

many thanks to all! that was i want to hear! i take a look to the detektorforum in some days, thanks bernd!

[mikipn]

Hack Lugatek VDI

Part1
https://www.youtube.com/watch?v=2So4...ature=youtu.be

Part2
https://www.youtube.com/watch?v=3s7DWjWDVLI

Part3
https://www.youtube.com/watch?v=kil9McoVWis

[onuba]

sabe.dimenciones someone printed circuit size .thanks

[RS_Phil]

Here's one look a like of Lugatek VDI, and in full version
http://www.mediafire.com/download/37..._full_pack.zip

[onuba]

RS_Phil Thank you