Please Carl ...

[C.Pruysers]

Carl . As requested , could you please give me the hook- up connections of the vcc , vss and Gnd to the IC's in the schematic of the C-Scope I sent you . I need this to make the PCB for this unit and I do not want to do it over and over again . So , the right hook up would be of great help to me . When done I will send you a copy of the board . Kees

[Carl]

Re: Please Carl ...

Well, I'm at work, with no schematic, but...

Best I can recall, all the opamps, the 393 comps, and the 4066 switches need to have VDD and VSS, because they all need rail-to-rail swing.

I don't recall what else there was, but I'll look when I get home.

- Carl