silverdog pi coil

[Qiaozhi]

i cant wait to test these on the mini pulse.

You said that your coil is now back to its 12us setting. Was that measured at the pre-amp output of the Baracuda, or is it the pure decay time as measured at the pre-amp input?

[sinclairuser]

measured on the output pin of the preamp, since that is the delay that the detector "sees", is that wrong?

[Qiaozhi]

measured on the output pin of the preamp, since that is the delay that the detector "sees", is that wrong?

That's good. You should see a further improvement when you connect it to the Minipulse Plus.