Pulsdetektor Miner 2

[bernte_one]

here a file which i had laying on my harddrive
maybe that it contains some little errors (watch for all wire links)

i hope someone has time to place all parts and number in sprint layout

Miner2.rar

[bernte_one]

here the additionel Infos you Need
http://www.pulsdetektor.biz/html/miner-2.html

Supply Voltage	: Nicad/NiMH 21.6V/2Ah
Pulsepower	: 510W/yS
Operating current	: 220-450mA
Display	: 128x64 Pixel/Led
Keyboard	: Foil 3x4 Pads
Disc	: Yes
Penetration(28cm/Spule)	: 180 cm
Penetration(50cm/Spule)	: 220 cm
Penetration(100cm/Spule)	: 320 cm

[mohandes]

here the additionel Infos you Need
http://www.pulsdetektor.biz/html/miner-2.html

Supply Voltage	: Nicad/NiMH 21.6V/2Ah
Pulsepower	: 510W/yS
Operating current	: 220-450mA
Display	: 128x64 Pixel/Led
Keyboard	: Foil 3x4 Pads
Disc	: Yes
Penetration(28cm/Spule)	: 180 cm
Penetration(50cm/Spule)	: 220 cm
Penetration(100cm/Spule)	: 320 cm

hi bernte
why dont make miner4
if decide to make tell me. but hex file is demo not complete.

[bernte_one]

it is tested an known as working


and i dont have a good layout for miner 4 in sprint layout or eagle or soemthing else

[mohandes]

it is tested an known as working


and i dont have a good layout for miner 4 in sprint layout or eagle or soemthing else

i think have layout for miner4

[bernte_one]

hello mohandes

did you have a good layout in any layout software format or this terrible black white image from the miner4 pdf file?
if you have the bw image i should be re-worked before you build it

[mohandes]

hello mohandes

did you have a good layout in any layout software format or this terrible black white image from the miner4 pdf file?
if you have the bw image i should be re-worked before you build it

hi
i will check my hard derive on PC and send here.can you improve it?

[bernte_one]

layout can be improoved
it can also be updated to more common components which are easier to buy

for example the bi directional diodes or the mosfet and the one opamp which is heavy to get

[Toros]

hello mohandes

did you have a good layout in any layout software format or this terrible black white image from the miner4 pdf file?
if you have the bw image i should be re-worked before you build it

This board is in SL6.

[bernte_one]

hmm looks good
is it from you, or from a user of the old pulsdetektor.de forum
i lokks similar to something i have seen before

many thanks for posting

[mohandes]

almani.zipalwmani.rar
see my friend

[Toros]

hmm looks good
is it from you, or from a user of the old pulsdetektor.de forum
i lokks similar to something i have seen before

many thanks for posting

This PCB I made using the template(scanned copy - bitmap) of pulsdetektor.de. It is the same as the board of Miner2, but there are fewer elements in the lower right corner. Note that I have not shown SMD capacitors which are mounted on the bottom PCB under IC9 and IC10. I have not shown and two double acting diodes that are parallel to the P5.

[mohandes]

This PCB I made using the template(scanned copy - bitmap) of pulsdetektor.de. It is the same as the board of Miner2, but there are fewer elements in the lower right corner. Note that I have not shown SMD capacitors which are mounted on the bottom PCB under IC9 and IC10. I have not shown and two double acting diodes that are parallel to the P5.

hi Toros
please put here your changes and if you can write in lay fine name of parts.
regards


Edit:
i forgot ask you about this detector , have stability and is deeper ? more data put here
regards

[Toros]

[QUOTE=mohandes;200108]hi Toros
please put here your changes and if you can write in lay fine name of parts.
regards

Mohandes, no need to schedules elements on board as the file miner4bs.jpg contains all the correct information that is needed. As I noted above board was taken as an exact copy of the publication in pulsdetektor.de. It is identical with the board of miner2, but there are fewer elements. This is clearly visible when comparing the two files miner4bs.jpg and minerbs.jpg(look at the Miner2 dokumentation).

I've made only Tiny of pulsdetektor.de detectors. I am not satisfied with the result. The sensitivity is lower than that of the detectors Barracuda and SMPI.
Tiny is a slow detector and can be compared with the other slow detectors like Sandbanks. Sandbanks is simple and easy to setup and I think it is more sensitive. The best modification of Sandbanks you can find on the site of Lucas Lab:
http://www.lucaslab.grandhost.pl/luc...krywacz_PI.htm
Detector documentation can be downloaded pull here:
http://www.lucaslab.grandhost.pl/luc...z_PI/pliki.rar

Other German detectors contain elements that have long been discontinued and can not be found in the market. This requires the use of substitutes and the board must be changed and the individual items to be restated.I figured I could not handle such a task. I hope that someone else will succeed and publish his thesis here. Maybe this will be Bernte one, which has no problems with the German language.

[mohandes]

Bernte one . how do u do?