I would like to try to build a home made version of "PULSE STAR II PRO Deep Seeking Metal Detector".

[Newbee]

Hi All,

I would like to try to build a home made version of the "PULSE STAR II PRO Deep Seeking Metal Detector".

I searched the forums, and if there are instructions, then I missed them.

The reason that I would like to build a home made one, is because I simply cannot afford to buy a used one.
My Garrett AT Pro is great, but just doesn't go deep enough, and I keep getting hits on beer cans and trash near the surface.

Any help pointing me to the right place would be appreciated.

Thanks in advance.

[leopard70]

Hi,Newbee,you can not build this detector because this device has programmed microprocessor.You can not find the hex file,which is needed to program the processor.That is why don`t waste your time to search any instructions.Just choose some other detector and build it.Delta pulse is close to Pulse Star.Good luck!

[Newbee]

Yeah, I figured it might just be impossible, but there is no harm in asking. Thanks!

[liudengyuan]

For the world to seek the PI detector circuit. Requirements 2X2m copper coil can detect 20X20CM depth of 2.5m, who can do it, please contact with [email protected], rewarding

[kt315]

try Delta Pulse with frame 1x1m-2x2m.

[kt315]