Chance pi 8 pin coil connector

[beachnut]

Hi everyone. I am purchasing a chance pi control box from Ukraine which has the up to date software and an 8 pin coil connector socket. I have wound a 7" basket weave coil which I will use with it. Can somebody tell me which of the pins are used for tx,rx etc so that I can have the coil ready for when it turns up.

Thank you

[kt315]

everybody has self standart'' you have to open the box and looking on wires to the socket inside. then you will have representation.

[eclipse]

Good stuff, probably bought from Ozzy? You need to open up the box, if it's from ozzy it's Z80 style box which is easy to open.

http://www.plastboxuk.com/Ebay/Z80/Z80(1).jpg