If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
to be complete I use sea hunter markii coil.
It has two coils inside I use one for tx and the other one for rx it is an excellent coil.
The Garrett Sea Hunter MkII coils have very low inductance values. I measured the TX and RX loops in the 8" coil as being around 110uH, and 120uH for the 14" x 10" coil.
Comment