Magnum on steroids!

[vlambers]

I made my device in 2013, so I'm not talking about plagiarism. There is a lot of information on the Internet and video on my device.
In this form were the first options in 2013.

[vlambers]

Sticker on the front panel, as well as other necessary files for assembly.


https://drive.google.com/drive/folde...U0?usp=sharing


Please note that it's stupid to not use photo 3 frequency. On the Mask and Magnum - on other contact areas

[Jakson30]

Sticker on the front panel, as well as other necessary files for assembly.


https://drive.google.com/drive/folde...U0?usp=sharing


Please note that it's stupid to not use photo 3 frequency. On the Mask and Magnum - on other contact areas

Will you sell the empty board? what price?

[vlambers]

Said the PM.

[vlambers]

Who did not have enough boards - came new, who need to be in a pm.
A week later, the fees for Fortune Pro FM in the case G1910, I think at the same time will be ready to stickers with punching under the keys.

[kt315]

I made my device in 2013, so I'm not talking about plagiarism. There is a lot of information on the Internet and video on my device.
In this form were the first options in 2013.

bad pics again. do you CAN read that without emotions? http://www.geotech1.com/forums/showt...here-share-out

[kt315]

SO HARD TO DO???


http://storage7.static.itmages.ru/i/...752f82af77.jpg

[vlambers]

http://radikal.ru/fp/bqjodj3wiir9c

[WM6]

Nice.
Probably something for lazy builders not me.

[Artyom]

Hey. I appeal to the assembled device. It is not possible to correctly establish the scale of metals, ferrite is always visible. for the phase shift corresponds to the capacitor C3? Give advice. Thank you.

[Nandor]

Hi. It might be your GEB sample circuit, or the phase difference between Tx and Rx is not correspondent.

[Artyom]

Hi. It might be your GEB sample circuit, or the phase difference between Tx and Rx is not correspondent.

The DD250 sensor is made by analogy with the Golden Mask RX-5.28 mH 100 turns 0.2, TX-0.76 mH 40 turns 0.5

[Nandor]

Your coil is ready made?

[Artyom]

Your coil is ready made?

Yes. wound, foil-shielded, balanced, but not flooded yet, while experimenting.

[Nandor]

Good, do you have an oscilloscope? with that it's easy. If you dont have try to adjust some how the frequency of the Tx coil so you get good phase angle between Tx and Rx. The oscillator drives the Disc and Geb sample circuits. Did you checked your components isnt there something wrong?