Tweet
Surf PI 1.2 problem I have a lot of built
Detection of the coin is only 15cm
Emit continuous noise
P1 has been adjusted to 0V
Measuring 7660 pin 8 5.04V
pin 4 -4.44V
Can not afford to eliminate noise and maddening detection distance is too small
In full accordance with the instructions to create http://www.adrianandgenese.com/blogg...tector-from-a- diy-kit /
what should I do?
Detection of the coin is only 15cm
Emit continuous noise
P1 has been adjusted to 0V
Measuring 7660 pin 8 5.04V
pin 4 -4.44V
Can not afford to eliminate noise and maddening detection distance is too small
In full accordance with the instructions to create http://www.adrianandgenese.com/blogg...tector-from-a- diy-kit /
what should I do?