If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I'm afraid of BT signal perturbation in coil nulling. I've been told that the neerest of the coil is the best for electronic. Maybe a good shielding would get rid of that.
One word : WAHOUOUOU !!!
It gives me an idea :
Modulate (AM) the TX signal X10 with the RX signal an transmit it to the receiver.
It would be simple to recover both signals.
Adding a Qi charger would resolve water issue. The battery would be enclose in a compartment sealed with silicon.
Comment