Kovin Pi Detector

[bernte_one]

Hello,

found this while searching easy project. Seems all files are complete, including unlimited programm file.
https://www.svet-el.si/bazaznanja/se...ge/2995-140-45

search web page translation from your browser, all important stuff is contained in two downloadable file at end of page

[WM6]

Hi bernte_one

This is 10 years old Pulse Induction project published in Slovenian magazine "Svet Elektronike" (World of Electronics).

Detector has no specific name, only generic name: "Detektor kovin" which mean "Metal detector". So it is not "Kovin PI".

It could be named according authors name "Tomo PI" or according his surname "Berend PI".

PCB is still available at magazine virtual Shop page:

http://trgovina.svet-el.si/productde...p?prodid=17003

As well preprogrammed micro AT MEGA 8:

http://trgovina.svet-el.si/productde...p?prodid=16962

You can pay by Paypal too, but buyer should be registered first.

[bernte_one]

Hello WM6,

thanks for explainings.
Do you thing it would be a good simple diy detector?
After easter Holidays i can order one Kit, i have some free time.

[WM6]

Do you thing it would be a good simple diy detector?

It is classical micro PI. Comparable with Stuart PI. Dedicated to AT Mega micro lover.
There is a lot to play with front end (coil, damping R, ignition transistor, diodes, OpAmp ...) to get best results and possibly learn something new.

[6666]

It is classical micro PI. Comparable with Stuart PI. Dedicated to AT Mega micro lover.
There is a lot to play with front end (coil, damping R, ignition transistor, diodes, OpAmp ...) to get best results and possibly learn something new.

WM6, do you see any information about fuse bits value , thanks,

[WM6]

WM6, do you see any information about fuse bits value , thanks,

Sorry 6666, nothing about programming AT MEGA and fuse setting.
From start it was provided for purchase PCB and preprogrammed micro.
Otherwise it should be business as usual with programming AT MEGA 8.

[6666]

Sorry 6666, nothing about programming AT MEGA and fuse setting.
From start it was provided for purchase PCB and preprogrammed micro.
Otherwise it should be business as usual with programming AT MEGA 8.

Thank you.