Garrett Ace 250

[Skeggydetector]

Hello has anyone got a schematic drawing for a Garrett 250 pcb as we have taken in a couple as part exchanges recently and they are not working correctly so looking for a bit of help if possible. Many thanks Ian

[Qiaozhi]

Hello has anyone got a schematic drawing for a Garrett 250 pcb as we have taken in a couple as part exchanges recently and they are not working correctly so looking for a bit of help if possible. Many thanks Ian

http://metaldetectingforum.com/showthread.php?t=42195

[Skeggydetector]

Thanks for that much appreciated.

Ian

[Carl-NC]

Readable version:

[Gwil]

Something odd: D5 and C34 (lower left area of schematic) are connected in series, which can't be right. I've seen another version of the schematic which doesn't show this, although I don't know where it came from.

[vlamvers]

Tell me please, the exact marking of the antenna connector in the ACE block, I can not find it.

[CDI]

Tell me please, the exact marking of the antenna connector in the ACE block, I can not find it.

This one:
http://m.ebay.com/itm/5-New-Aviation...-/110976270366

[vlamvers]

[QUOTE = CDI; 233253]
http://m.ebay.com/itm/5-New-Aviation-Plug-5-Pin-16mm-GX16-5-Male-and-Female-Panel-Metal- Разъем- / 110976270366 [/ QUOTE]

Thanks, it's standard - it's short if you solder it in the board. And it's fixing inside the case, but it is necessary from the outside.
He does not fit.