SS+ picture

[Pepso]

Hi all,
is there anyone which have a photo of Silver Sabre+ operating panel?

[Sean Goddard]

Re: SS+ picture




Side panel as graphic ( attached) NEXT thread is FP (word .DOC) but not very good I'm afraid.

If you lay out another using AutoCAD or something like that, thne you could send it to me please as I want to make one too but am too busy.

Print the Side panel on "Adhesive Silver Paper for Inkjets" comes out AWESOME, then coat with clear laquer or transparent plastic, and seal edges. Looks better than original!!

CHEERS!

[Sean Goddard]

Re: SS+ picture




Front Panel. Sorry it's a home made one.

I asked Tesoro what font they used, and as usual, they sucked. Kindly suggested I could find an equivalent on the web!! YEAH, How many lifetimes do they think I got??

Anyways, I got lucky. Try "Charlemagne" as a font, looks identical (almost) to the one they used on the SS.

Have Fun!

[Pepso]

Re: SS+ picture




Many thanks Sean, the side label is nice.
My PCB for SS+ will be ready in few days, I have still problem to finish single sided board 8 x 9 cm without an airwires on the top. It is designed for cheap plastic box KP 3 or Z5(I think it is product from Poland).
I'll send you the PCB layout soon. Somebody sent me this picture, now I know what I'm building :-)
Sorry for my english.



Plastic boxes

[Marcello]

why SS+ ?

Excuse for my intrusion, but I don't succeed in understanding because realize the SS+ and not the tesoro BandidoII posted on this forum!
I have realized them both and the SS+ is an old project and of low performances.
by

[Sean Goddard]

Re: SS+ picture

Hi Again Pepso.

If you have any spare circuit boards for the SS+, could you possobily let me buy one from you please?

I am making an SS+ for my friend daughter for Christmas (not much money) and have decided on an SS+

You can get me email and snailmail addy from my website



Sean's Website

[Pedro]

Re: SS+ picture

Hi Pepso
What kind of coil are you thinking to use, the original by Tesoro or a homemade?
If it's a homemade can you give me some info about it, because i'm starting to make a SS+ plus but a have very few almost nothing info about the coil

Thanks in advance
Pedro

[Pepso]

Re: SS+ picture

Hi, I'm thinking to use Tesoro coil. There was a few attempts to build coil for Tesoro replica, but the sensitivity was poor. Maybe somebody has built good working coil for Tesoro replica...

[Pepso]

Re: SS+ picture

No problem. For you free of charge.

[Pepso]

Re: why Bandido ?




Why Bandido, this one is better - it has notch function :-)

[Sean Goddard]

Re: SS+ picture

Yes I did, and now it's a commercial design!!

Check out the 11.5" WebCoil design.

Tell you what Pepso, send me a SS PCB when you have finished it(fibreglass or resin is OK) and I'll let you have a coil at a special price.

How's that sound?

If ANYONE else has ANY tesoro PCB's made, Eldorado, Bandido etc, than let me know. I'll offer the SAME deal.



11.5