If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Was thinking about ferrite simulation again. What I said about a long TC target looking like ferrite was true except for signal reversal. Was looking at amplitude and not thinking about polarity during Tx. No idea how to simulate ferrite with spice.
Throw a look at "Target models for simulation" and see how I entered the ferrous quadrant with a NIC. I did not seek solution for a modelling a ferrite, but I'd go with low low resistance and a very high negative inductance.
Tweet
Comment