IDX PRO

[techstar]

Hi , could someone please advise me what resistor type to use on the IDX PRO Board from Silverdog.

[diggerbarns]

metal film 1% or carbon film 5% 1/4 watt. 1% can be harder to read if
you are not used to things. Get small amounts from Ebay. Usually come next day.
IDX PRO board has very small holes. Can be difficult to get them out if you put in the wrong
place. So be careful. I would go for 1% all over.

[kt315]

https://www.banggood.com/1350pcs-135...r_warehouse=CN

[Koala]

https://www.banggood.com/1350pcs-135...r_warehouse=CN

Well found

[techstar]

Thanks guys , order placed.

[techstar]

I am ready to populate the board with capacitors now , is there a list of the proper types of capacitors please.

[Nandor]

Please read the topic, there is no need to make even more "help topics". Read the original IDX PRO topic from the start to the end and you will find the answer to all of your questions.

[Tibuck19]

IDX PRO the Red board from silverdog, Can anyone tell me what P5 SW does? is it all metal to discrimination ? and why is there less Zener diodes compared to the green board ?

[daluka]

IDX PRO the Red board from silverdog, Can anyone tell me what P5 SW does?

ON/OFF

[Tibuck19]

ON/OFF
[ATTACH]44002[/ATTACH]

Thank you .