Tweet
Hello, I have a broken coil, the case I would like to use again.
How do I remove the potting compound, does anyone have a tip for me?
How do I remove the potting compound, does anyone have a tip for me?
-
-
why do remove the epoxy? i think you must change just a cable. -
I want to have the housing, not repair the coilComment
-
Deep freeze, fast heat, deep freeze, fast heat...
Comment
-
or
Comment
-
I think I'll try milling
I thought, here someone knows a simple method ....Comment
-
tips
hit it lightly with a wooden hammer. lightly. adhesion of epoxy to plastic is low. it must go.Comment
-
Hi Andi,
take the form and copy it via vacuum forming
removing the epoxi from Shell is a work for a slave, it will take some hours and the dust you produce is not healthyComment
-
I do not have any equipment for vacuum forming.
But as already written - I'm milling it outComment
-
Liar
I also did not have equipment, then I salvaged old oven and vacuum cleaner from scrap, that is all you actually need!Comment
-
then by dremel with milling cutters.Comment
-
-
hipothetically you can take anything with dreaming fantazy. i do not see your face in the pic.Comment
-
Comment