Tweet
i have just resoldered the coil connector for someone i know and i did a resistance check on the TX/RX coil connections and im getting a reading of about 4 ohms on one and about 45 ohms on the other...is this correct ??? as im not sure if the two screening connections are the correct way around.
-
-
right screening connection is all wires connecting in one point near to preamp. this is rule of right screening connection choice. -
Comment
-
Artiomuuushkaaa... take a clip from Global Coils Database and you will be happy. ahaha!
---------------------------------------------------------------------------------------------
Troy Shadow
Name TX-L TX-R (ohms) TX-fo TX wire RX-L RX-R (ohms) RX-fo RX wire
________________________________________
X2 S-9 9" 5.72mH 23.6 --- --- 6.25mH 25.2 --- ---
X5 7" 1.067mH 4.33 --- --- 6.53mH 32.2 --- ---
X5 9" 1.044mH 4.45 --- --- 6.50mH 32.7 ---
X5 1.1mH / selfres = 255kHz 6.5mH / selfres = 87kHzComment
-
....Comment
-
for deep searching of any VLF coil i released especial coil tester. you can use and get data. inform and i will fill the database.Comment
-
its ok now all sortedComment
Comment