Is anyone here able to give a diagram of the Minelab Musketeer?

[fx3]

Is anyone here able to give a diagram of the Minelab Musketeer?
Amateur radio forums are the most irresponsible. Schemes are scattered throughout the forum, not ordered, and half of them are uploaded to photo exchangers that no longer exist.
Who has the Minelab Musketeer circuit?

[kt315]

....

[fx3]

....

[ATTACH]53159[/ATTACH]

Thank. I am interested in 2 sections of the circuit - filter block (switch), and a transformer. Do you accidentally have a photo of these areas, and the paths near them?

[ivconic]

Thank. I am interested in 2 sections of the circuit - filter block (switch), and a transformer. Do you accidentally have a photo of these areas, and the paths near them?

If i recall correctly; we did it all back in 2010.
It is here on forum, complete documentation, numerous clear photos of each part, schematic, several pcb versions etc.
You have it all here on forum. You only need to use search option.
It is pointless to repeat same stuff scattered on tens of pages and done in the past.
What's related to Minelab Relic Hawk; also applies to Musketeer too.
Very small differences between those two models.
Most accurate reverse engineering, as i recall, was done by Ultimate Haze and me, we did that together,
And we posted all the possible info you'll ever need.
Just use search option and read the topics.

[fx3]

[QUOTE = ivconic; 280496] Если я правильно помню; мы сделали все это еще в 2010 году.
Это здесь, на форуме, полная документация, многочисленные четкие фотографии каждой части, схемы, несколько версий печатных плат и т. д.
Все это есть здесь, на форуме. Вам нужно только использовать опцию поиска.
Бессмысленно повторять один и тот же материал, разбросанный по десяткам страниц и сделанный в прошлом.
Что связано с Minelab Relic Hawk; также относится и к мушкетеру.
Очень небольшие различия между этими двумя моделями.
Насколько я помню, наиболее точный реверс-инжиниринг был выполнен мной и Ultimate Haze, мы сделали это вместе
и опубликовали всю возможную информацию, которая вам когда-либо понадобится.
Просто воспользуйтесь функцией поиска и читайте темы. [/ QUOTE]

With all due respect to you, this is not the answer. ))) You had the Musketeer device on the table in front of you, and could not describe these two important areas in the diagram. I have studied all the topics and mentions related to the Musketeer. In some diagrams it is indicated that this is a choke, and in others it is a transformer. And in the photo there is a transformer board. It is unclear neither the direction of the turns (if it is a tap from the midpoint), nor the way of connecting the speaker to it (if it is a transformer). The secondary winding hangs in the air according to the scheme.
They cannot be identical devices. A Relic is a Relic and a Musketeer is a Musketeer. If they were identical, you would not say in other topics "I was too lazy to draw." When there is something to draw, there are differences. For what purpose was the device disassembled, and photos were exhibited, if there is no PRINCIPAL diagram. Bad job. Useless.

[sbalio1]

enney pcb for this detector ???????????

[kt315]

With all due respect to you, this is not the answer. )))
---
guys, USE ADVANCED SEARCH ENGINE OF THE FORUM. DO NOT RELOAD US BY YOUR BLANK REQUESTS.

https://www.geotech1.com/forums/show...-in-this-forum

[kt315]

Bad job. Useless.
--
in a russian forum you will be banned in moment if ask a schematic in first post. SURE BANNED.
this forum is tolerant. so be happy there LOL!!!

[fx3]

With all due respect to you, this is not the answer. )))
guys, USE ADVANCED SEARCH ENGINE OF THE FORUM. DO NOT RELOAD US BY YOUR BLANK REQUESTS.

https://www.geotech1.com/forums/show...-in-this-forum

I repeat, I have studied all the topics about the Musketeer. Everything that you recommend, I have already read. I can still read. But the transformer connection diagram from this will never appear)))

НЕ ПЕРЕЗАГРУЖАЙТЕ НАС ПУСТЫМИ ЗАПРОСАМИ.

I would not reset you if the photos that were uploaded here could be downloaded)))


A good example would be your post that cannot be downloaded)))
https://www.geotech1.com/forums/show...ight=Musketeer

Bad job. Useless.
--
in a russian forum you will be banned in moment if ask a schematic in first post. SURE BANNED.
this forum is tolerant. so be happy there LOL!!!

Why will I be banned? For truthful words? There is no Musketeer scheme. There is a scheme of Relic Havka. The Musketeer was held in his hands, but not drawn.

[kt315]

i see you are asiatics, you want RIGHT NOW AND ALL. ask ML. we are just beginners.
if you think as you went in english forum here all must give to you any sch on your first request.
NO SIR. i had see just one fabric sch, from Carl, for ALL TIME I AM HERE.

pleasure

[fx3]

if you think as you went in english forum here all must give to you any sch on your first request.

Good)) I will not reboot you. Moreover, the photos that you posted, you still will not re-upload)))

[kt315]

do not do me Brilliant Member of this forum. i am not The Wizard of Oz county to give a brain to somebody. LOL!

ask Zakrzhevsky on schs http://www.md4u.ru/index.php

[ivconic]

[QUOTE = ivconic; 280496] Если я правильно помню; мы сделали все это еще в 2010 году.
Это здесь, на форуме, полная документация, многочисленные четкие фотографии каждой части, схемы, несколько версий печатных плат и т. д.
Все это есть здесь, на форуме. Вам нужно только использовать опцию поиска.
Бессмысленно повторять один и тот же материал, разбросанный по десяткам страниц и сделанный в прошлом.
Что связано с Minelab Relic Hawk; также относится и к мушкетеру.
Очень небольшие различия между этими двумя моделями.
Насколько я помню, наиболее точный реверс-инжиниринг был выполнен мной и Ultimate Haze, мы сделали это вместе
и опубликовали всю возможную информацию, которая вам когда-либо понадобится.
Просто воспользуйтесь функцией поиска и читайте темы. [/ QUOTE]

With all due respect to you, this is not the answer. ))) You had the Musketeer device on the table in front of you, and could not describe these two important areas in the diagram. I have studied all the topics and mentions related to the Musketeer. In some diagrams it is indicated that this is a choke, and in others it is a transformer. And in the photo there is a transformer board. It is unclear neither the direction of the turns (if it is a tap from the midpoint), nor the way of connecting the speaker to it (if it is a transformer). The secondary winding hangs in the air according to the scheme.
They cannot be identical devices. A Relic is a Relic and a Musketeer is a Musketeer. If they were identical, you would not say in other topics "I was too lazy to draw." When there is something to draw, there are differences. For what purpose was the device disassembled, and photos were exhibited, if there is no PRINCIPAL diagram. Bad job. Useless.

It is a choke. At the time i had no schematic symbol more suitable. But in many posts i explained it is a choke.
Relic Hawk and Musketeer are pretty much the same, again explained in the past, with differences that Relic Hawk is having additional switching in channel filters, providing 3 reactivity modes. Again; explained many times on several topics.
Yes i was lazy to draw separate schematic of Mukseteer at the time. Later on yet i did draw it and it is present of forum, repeated in several posts, on several different topics. Do the search.
Bad job? Useless?
Than don't use it.
Do it on your own and be happy.
With such attitude here you wont get far dude.
Don't act too smart and be polite.
Overall don't be such lazy and do the search again.
Right now i have here in front of me latest most updated and most accurate Musketeer schematic and original pcb, done by me this year, in ExpressSch and in Sprint Layout 5.
I intend to order a batch of those pcb's from JLPCB these days. What a coincidence?
Guess what? You will never have nor see it in your life.
Why? Because of your attitude.
Cheers!

[ivconic]

6 posts on forum and already acting wise!?
Prepare your lower back for a giant kick from this forum soon.

[fx3]

It is a choke.

Thank you.

Right now i have here in front of me latest most updated and most accurate Musketeer schematic and original pcb, done by me this year, in ExpressSch and in Sprint Layout 5.
I intend to order a batch of those pcb's from JLPCB these days. What a coincidence?
Guess what? You will never have nor see it in your life.
Why? Because of your attitude.
Cheers!

You don't have a scheme))) And you never had)))