CIAO CARL

[gombary]

HELLO CARL FOR ME YOU ARE THE BEST AND OLDEST ABOUT THIS FORUM PLEASE OR NEED A LITTLE FAVOR I NEED SCHEME OF THE SSP-3100G U THE TRANSISTOR THIS HAS BEEN LIGHTNING AND THANKS TO EVERYTHING CARL

[Andi68]

looks like ****

[kt315]

save the board for desoldering. do not break it out.

[Qiaozhi]

HELLO CARL FOR ME YOU ARE THE BEST AND OLDEST ABOUT THIS FORUM PLEASE OR NEED A LITTLE FAVOR I NEED SCHEME OF THE SSP-3100G U THE TRANSISTOR THIS HAS BEEN LIGHTNING AND THANKS TO EVERYTHING CARL[ATTACH]53335[/ATTACH][ATTACH]53336[/ATTACH][ATTACH]53337[/ATTACH]

Please do not type your posts in CAPITAL LETTERS. According to forum etiquette this is equivalent to shouting. Also, it make your posts difficult to read.

[6666]

I hate seeing repairs made with a plumbers iron, just cut the transistor legs at the body and use the old legs as pcb pins and lightly solder the new tranny to old pins takes only seconds to do and saves destroying the pcb and makes further replacements easy.

[WM6]

I hate seeing repairs made with a plumbers iron,

.

With COVID-19 we need distance at least 2m, so clean work with flamethrower is suggested?

[surfdetector]

With COVID-19 we need distance at least 2m, so clean work with flamethrower is suggested?

[gombary]

grazie Andi68 sei un vero amico

[gombary]

ok

[gombary]

ok grazie

[gombary]

Andi68 il transistor e bruciato tutto non si vedi piu il numero per favore mi dice quale mettere

[Qiaozhi]

Andi68 il transistor e bruciato tutto non si vedi piu il numero per favore mi dice quale mettere

Please read the forum rules -> Basic Rules of the Forums
and make your posts in English.

[gombary]

the transistor is burned all you do not see the number anymore please tell me what number of transistors

[Carl-NC]

Probably no one here knows what transistor it is. Have you asked Detech?

[ivconic]

I had one on service 10 years ago, similar fault.
I was lazy to examine those components so i can't tell.
But most probably is some BDxxx.
Most important is to distinguish about polarity by now.
You do that by analyzing the connections of its pins.
Collector is always in the middle.
Look up for power rails and relation to collector.