c.scope cs9000 HPX

[kt315]

on following week i will delete whole folder in album with the CS 9000 pics. then i will begin
to put new series of pics of TM-808.
all the best

[sinclairuser]

pcb pics

i find it fascinating it quite clearly is a discovery built unit, but the pcb looks like an older cscope board, especially the tinned pads to connect the wires on the edge of the board.
great job KT, thankyou.

[kt315]

welcome amigo. i did not desolder all chips to show full layout because after first attempts i noticed
that pcb is done from poor textolite. it exfoliates from not so high temperature.

[Ice]

please tell me how to set up the C.Scope 9000 HPX Metal Detector