Announcement

Collapse
No announcement yet.

Old archives

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Old archives

    Hi all and thanks for acceptance. I am trying to do a recearch on an old construction caled the gold gun.I know you dont discuss lrls anymore but there are some sites that link here and some usefull info may be lying in here somewhere.Unfortunately i cant find any.I dont want to start a thread for the gold gun since you dont do this anymore. All i need is if any one can point old threads that may be of use.If this thread is in the wrong place admins please help! Thanks in advance!!!

  • #2
    yup. the wrong place. rego in proper forum. https://www.geotech1.com/forums/foru...geLocators-com

    Comment


    • #3
      To find the old threads you have to use the search correctly, at the top right hand corner of the page there is the white search box, inside the box type "gold gun" you must use the quotes
      or it finds every thread that has the single word GOLD or GUN in it, your search result should give 23 threads.

      Comment


      • #4
        There's still these LRL articles on Geotech1 :
        https://www.geotech1.com/cgi-bin/pag...e=projects.dat

        Comment


        • #5
          The Gold Gun was not an LRL in the traditional sense of an outright scam. I believe it's a directional AM receiver which could be used to locate conductive ore bodies. However, the way it was marketed was highly deceptive.

          Comment


          • #6
            Click image for larger version

Name:	gold gun.jpg
Views:	1
Size:	656.1 KB
ID:	361533 is this the one

            Comment


            • #7
              Originally posted by Carl-NC View Post
              The Gold Gun was not an LRL in the traditional sense of an outright scam. I believe it's a directional AM receiver which could be used to locate conductive ore bodies. However, the way it was marketed was highly deceptive.

              Whats the theory of using a AM receiver ?, does the received signal increase when you walk over the ore body ?

              Comment


              • #8
                Originally posted by 6666 View Post
                Whats the theory of using a AM receiver ?, does the received signal increase when you walk over the ore body ?
                received signal from what TX source?

                Comment


                • #9
                  Originally posted by 6666 View Post
                  Whats the theory of using a AM receiver ?, does the received signal increase when you walk over the ore body ?
                  Something like that. Or it may be a decrease, I don't recall.

                  Comment


                  • #10
                    I remember an article in a popular electronics from the early 70's with an article on using an AM radio but from what I remember they were sending the signal into the ground through ground rods.

                    Comment


                    • #11
                      Originally posted by kt315 View Post
                      received signal from what TX source?

                      AM broadcast radio station.

                      Comment


                      • #12
                        Originally posted by 6666 View Post
                        AM broadcast radio station.
                        9-27kHz range is AM?

                        Comment


                        • #13
                          Originally posted by kt315 View Post
                          9-27kHz range is AM?

                          I have no information on how this device is supposed to work I am only guessing they tune it to a AM station or some other radio signal that's available.

                          Comment


                          • #14
                            Originally posted by kt315 View Post
                            9-27kHz range is AM?

                            The AM Broadcast band in the USA is 530 kHz to 1700 kHz.

                            From Wikipedia:
                            "Medium wave (also known as Medium frequency (MF)), which is by far the most commonly used AM broadcasting band. In ITU Regions 1 and 3, transmitting frequencies run from 531 kHz to 1602 kHz, with 9 kHz spacing (526.5 kHz - 1606.5 kHz), and in ITU Region 2 (the Americas), transmitting frequencies are 530 kHz to 1700 kHz, using 10 kHz spacing (525 kHz - 1705 kHz), including the ITU Extended AM broadcast band, authorized in Region 2, between 1605 kHz and 1705 kHz, previously used for police radio."

                            Comment


                            • #15
                              Originally posted by 6666 View Post
                              I have no information on how this device is supposed to work I am only guessing they tune it to a AM station or some other radio signal that's available.
                              we must search the description on this detector. or full info. i see those frequencies maybe specific choised for every country.
                              naked sch does not give clear picture.

                              Comment

                              Working...
                              X