Announcement

Collapse
No announcement yet.

Need pinout coil in pcb whites coil gmt gold master

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #31
    Originally posted by hooby life View Post
    Hi altra did tx is 2.75 uh . Or 275 uh ?
    And my coil is only 33 nf +2.2nf
    And risistor between tx outsid and tx insid .
    Yes that is a typo, should be 275uH. I still have this coil some where, if I find it. Will double check for the resistor. What value is the resistor on Tx?

    Comment


    • #32
      Originally posted by Altra View Post
      Yes that is a typo, should be 275uH. I still have this coil some where, if I find it. Will double check for the resistor. What value is the resistor on Tx?
      305k ohm .were can found more explanation to make this coil pls ?

      Comment


      • #33
        I never made this coil. See KT315's Post #15 the pdf file has a lot of information. I don't recall anyone on the forum making this coil and sharing details.

        Comment


        • #34
          Originally posted by Altra View Post
          I never made this coil. See KT315's Post #15 the pdf file has a lot of information. I don't recall anyone on the forum making this coil and sharing details.
          Thanks

          Comment

          Working...
          X