Micronta 4003

[pruva]

Pls can anyone send me Pdf format manual and schematics of micronta 4003

[email protected]

best regards

[Qiaozhi]

Pls can anyone send me Pdf format manual and schematics of micronta 4003

[email protected]

best regards

Here's the schematic:

[pruva]

Thank you for your kind help. I also need for manuel's pdf.
Best regards

[Qiaozhi]

Thank you for your kind help. I also need for manuel's pdf.
Best regards

The manual is here: http://www.geocities.com/treasureport/4003.htm

[Unregistered]

instruction manual Micronta 4003

RE: Proscan reply I would like to get the instructiion manual emailed to me, if you would. My daughter lost the emergency cut off pin to her 4 wheeler and I can't remember how to work the metal detector,so I can find it. My email address is [email protected]
Thank you for your help.
KY

[pruva]

The manual is here: http://www.geocities.com/treasureport/4003.htm

Thank you for your kind help but This is an image photos,
I need to mark this document for translating my language by computer programs. So I need Word document or pdf document. If someone can send I'll be thankfull.

[Qiaozhi]

Thank you for your kind help but This is an image photos,
I need to mark this document for translating my language by computer programs. So I need Word document or pdf document. If someone can send I'll be thankfull.

Try here -> http://website.lineone.net/~johngl1/page9.html

[Unregistered]

Here is a manual

PhilippeM



manual micronta 4003

Thanks This helped alot

[javajunkie]

I have a complete manual with drawings in pdf.

Schematic diagram, too.

Will send free to anyone interested.

proscan








Click Here

Got hold of Micronta 4003 (3003) metal detector Need service information Schematic
Etc. Any info help full
Tks
javajunkie

[pruva]

I have a complete manual with drawings in pdf.

Schematic diagram, too.

Will send free to anyone interested.

proscan

Click Here

Dear Proscan, I don't know if you are still here in this forums, I hope you're.
I found a document the site that you guidanced but the pdf file need password, the place where I found is Polish and I can't understand. Here is the message from the website.

ProScan
Właściciel


Dołączył: 22 Wrz 2005
Posty: 1568

Wysłany: Sob Gru 16, 2006 4:38 pm Temat postu: Przygotowałem wersję pdf z instrukcją do wykrywaczy MD 3006 GD 1006 Velleman CS150 Micronta 4003 (i wszelkich innych klonów). Instrukcja może różni się nieznacznie z wersją, którą akurat macie, ale myślę że w zupełności wystarczy żeby móc te wykrywacze obsłużyć.

Kliknij i POBIERZ

Hasło do odczytu: TUTAJ (kto nie chce się logować, to niech napisze do mnie – dostanie hasło emailem).

Instrukcja do użytku osobistego. Jeśli ktoś chce sprzedać taki wykrywacz i potrzebuje instrukcji, by ją dołączyć, to zapraszam na zakupy.



proscan

address is ( http://www.proscan.gliwice.pl/forum/...ronta&start=15 )


Please send me the pdf file password.
Best regards.

[greylights]

Hello

New to the forum, found by chance when I put Micronta 4003 in search engine.

Bought mine in early 90's and found it was brilliant for finding great iron manhole covers and not much good for anything else so eventually bought what I considered a better detector (well it was several times more expensive) and finally traded that in for a computer.

But I still have the Micronta, am thinking of using it having discovered it's VLF and am surprised to find folk discussing this machine as if it's any good.

Am I missing something? Is there more to this relatively cheap machine than just an uncanny ability to home in on a long buried SWWB studded iron cover, lovingly manufactred by Arkwrights of Manchester? I'm beginning to suspect, despite reading the manual, that perhaps I just wasn't using it right.

Tomorrow I'm off to replenish my battery stock and take this thing off to the beach. Any tips beyond the manual would be greatly appreciated.

Thanks in anticipation.

Grey