If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
A moje6 li da spodeli6 ka da vdigna dalbo4inata na magnuma!I dali bi rabotil s koncentri4ni bobini,eventualno broi navivki za tiah!
Probvah da napravja ekrana na magnuma s platni navivki i tova malko pomogna ama ne dostata4no!
I o6te ne6to - pri opisanieto za naprava na koncentri4na glava e spomenat niakav kontakten sprei?Vaprosa e s kakvo moje da se zamesti v na6te uslovia?
Hi,here is a circuit,that I did before some months.Coil configuration is DD,but is usefull and concentric.If you want to check I'm sure that you will be satisfied.
regards
ENGLISH
>
> Hallo my name is Dalibor
>
> Hallo
> Have you picture PCB and Pricel for coil for shema
> VLF METAL DETECTOR from Vladimir MInkov
>
> from THIS link
>
>>
>>
>>
>>
>> SERBIAN
>>
>> Ako razumes srpski
>>
>> Dali mozda imas vrednosti kalema za semu VLF METAL
>> DETECTOR od Vladimir MInkov
>> Sa OVOG linka
Hi,here is a circuit,that I did before some months.Coil configuration is DD,but is usefull and concentric.If you want to check I'm sure that you will be satisfied.
regards
ENGLISH
>
> Hallo my name is Dalibor
>
> Hallo
> Have you picture PCB and Pricel for coil for shema
> VLF METAL DETECTOR from Vladimir MInkov
>
> from THIS link
>
>>
>>
>>
>>
>> SERBIAN
>>
>> Ako razumes srpski
>>
>> Dali mozda imas vrednosti kalema za semu VLF METAL
>> DETECTOR od Vladimir MInkov
>> Sa OVOG linka
Comment