Anyone have a spare 50K ohm multri-turn pot?

[e. j. fowler]

I am looking for a multi-turn pot, in the 50K ohm range. I am hoping to add manual GB to a deleon. Unless, someone know why not to.

thanks.

ejf

[Gary]

Re: Anyone have a spare 50K ohm multri-turn pot?

I have a 30 turn, 50k Trimpot, with a Slot Screw driver adjustment. (Bourns)

I also have Three, 10 turn HellPots, Made by Beckman. But they are Quite Large. 1.75" Dia, by 2" High, with a Relatively short 1/4 inch shaft.

[Edwin J. Fowler]

Thanks Gary, but.....

I need one that is more like a "OEM" part. I have fit a 1-inch diameter pot in the place where they required a smaller pot. It wasn't pretty.

thanks for the thought though.

edwin j. fowler

[david]

Re: Anyone have a spare 50K ohm multri-turn pot?

Try Digi-Key