little suggestion for carl (administrator)

[rommel2001]

dear Carl i want to ask you if is possible to organize in one section of upload all the schematics with the pcb, so all the members of this forum can quickly and frendly download the schematics and the pcb of the detector that want to make or repair.
Best Regard

[Carl-NC]

Actually, I have a place on the main web site for commercial schematics, but I just haven't had time to keep up with it. One issue I have, is that any schematics that get "officially" posted, must be "unofficial" schematics. That is, they cannot be the original manufacturers' schematics, unless I have permission to post them.

Meanwhile, I specifically created the "Schematics" forum for the purpose of consolidating schematics & PCB layouts in one place. I'm slowly going through the original Tech forum archive and moving them over.

- Carl

[rommel2001]

in the forum for one model of metal detector there are a lot of schematics so it's very difficult to know wich is the right and functionally schematics.
thank you very much Carl