If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
you need to go to a Hackers Website to get the Hack/Crack for the Eagle Software. I don't think it's been done because the owner lets everybody use his software for FREE if its for NonComercial purposes, but it has a restriction in PCB size of 3.5" x 4" or EURO size board.
Just don't understand why someone would want to do that.
Comment