SNIFFER XR-71

[Geo]

Ohhh where are the other that i wrote ?????


I dont know why dont see the text that i paste here.....
Mixron gives for Delta Pulse with coil 1x1m depth....
130cm for plate 10x10cm
180 25x25cm
260cm 50x50
350cm 1x1 m
With coil 2x2 or 3x1 or 3x3 you can increase the depth from 20...50%
And if you increase the voltage at Mosfet from 12V to 24V then......
or Boooom
Regards

[786]

What wire (awg) and turn

Hi
dear geo
CAN U wirte "ALMOST" wire (awg) 1*1 =? 2*2 =? 3*3 =?
and turn 1*1 =? turn 2*2 =? 3*3= ?
whitout substitute resistor.
I apologize for take time you dear geo.
thanks alot.


the lifetime is very little but use of experience other is very beneficial.

[lak]

build lcd for delta pulse

Hi all
anybody can build lcd for delta pulse or xr71 instead speaker or dc meter please say here.
the detector clone has lcd .can i build similar it for use on delta or xr71.
if anybody information know please guide me.
Regards

[Geo]

Hi
dear geo
CAN U wirte "ALMOST" wire (awg) 1*1 =? 2*2 =? 3*3 =?
and turn 1*1 =? turn 2*2 =? 3*3= ?
whitout substitute resistor.
I apologize for take time you dear geo.
thanks alot.


the lifetime is very little but use of experience other is very beneficial.

Hi 786. You must use 1mm wire (at least) with 2.2Ohm resistor in series
The original coil is 110cm * 110cm and have 16 turns. So at the 2*2 you need 8 turns.
Bye

[Geo]

Hi all
anybody can build lcd for delta pulse or xr71 instead speaker or dc meter please say here.
the detector clone has lcd .can i build similar it for use on delta or xr71.
if anybody information know please guide me.
Regards

Hi. I saw at a Turkey forum a Delta Pulse with LCD. Try to search at turkey language.

[erolunall]

http://www.teknolojiekibi.com/yeni/i...hp?topic=325.0


LCD DELTA PULSE

[786]

thank for help

Hi
dear geo
thank you very much for help.
by

[786]

help for build lcd

hi
dear erolunall
thank you for guide
already i saw this site but i dont know turkish.
i want pcb lcd and components list.
there is only picture is not help for build.
thank again.

[erolunall]

You can learn Türkish but There are no info about LCD connection.
You can buy DP with lcd about 400 dolar from this site.

Best Wİshes
Erol

[erolunall]

hello
http://www.electronics-lab.com/proje...022/index.html
maybe you can try but ampermeter can measure I dont Know.You can ask forum member Max for this..
if you try please inform us.
regards.
Erol

[786]

help me dear max for build lcd for delta pulse one side

Hi
dear Max
Can you help me for buils lcd one side DeltaPulse.
component list , pcb , shema connexion and hex file.
if you know please help me .
thanks alot.

[1843]

One of the differences between DP and XR

[Geo]

At the original schematic (XR71p.pdf) the resistor is 330ohm (at xr71 is R22)

[1853]

R22

At the original schematic (XR71p.pdf) the resistor is 330ohm (at xr71 is R22)

Hi Geo,

GTK has said many times that a resistor in the XR71 is wrong, I think it is R22.
Try to change it and see if it becomes improved or...

Best regards,
1843

[Geo]

Hi 1853.
Today i will open my XR71p (original pcb) and i will see what is the R22.
After it (if it is 330R) i will change it to 390R and i will do a test
Regards