Announcement

Collapse
No announcement yet.

About DeltaPulse and XR71.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • About DeltaPulse and XR71.

    Hi. I have received a lot of mails about PCB and schematic of Delta Pulse and XR71. I have a problem with my PC so i can't send the shematic who i have (now i write here from my office). I hope next week (new year) to have repair my PC so to send all the informations who i have about DeltaPulse and XR71.

    Geo

  • #2
    hi geo

    hi
    i reguired the XR71 s PCB only
    if your computer get ok please send me it.
    good working and good lucks

    Comment


    • #3
      Originally posted by ismail surek
      hi
      i reguired the XR71 s PCB only
      if your computer get ok please send me it.
      good working and good lucks
      Hi Ismail. Maybe tomorow.
      Geo

      Comment


      • #4
        XR_71

        Hi to all. I will post all the files who i have about XR_71. The schematic is in pdf format and the pcb is in jpg. I have the pcb file in Protel format but i can't post it because the size is 390Kb except if Carl (as administrator) let me to upload the file.
        Attached Files

        Comment


        • #5
          XR_71 (other two files)

          PCB from Geo
          Attached Files

          Comment


          • #6
            ABAN Thanks

            Thanks to ABAN who send me the pcb files.

            Geo

            Comment


            • #7
              XR-71

              Hi All,

              Interesting that the layout and board shown, is identical to that designed for the Eurodec and Woodtec detectors by Pulse Technology Ltd.

              If anyone is interested, I have three boards, loaded with resistors, capacitors, diodes and transistors, but without IC's. The boards are used and untested, and in good condition. All IC positions are socketed, so it's just a matter of plugging them in. Email me at [email protected]

              Eric.

              Comment


              • #8
                can anyone give me one router XR71 pcb_?

                Comment


                • #9
                  Originally posted by ismail surek
                  can anyone give me one router XR71 pcb_?
                  Hi. I have a Protel 99SE Pcb file but it is 391Kb so i cant send it to Forum.
                  If Carl as administration open the Forum i will send it.

                  Comment


                  • #10
                    you can send it to my mail adress
                    thank you
                    please send.
                    [email protected]

                    Originally posted by Geo
                    Hi. I have a Protel 99SE Pcb file but it is 391Kb so i cant send it to Forum.
                    If Carl as administration open the Forum i will send it.

                    Comment


                    • #11
                      I need the pcb xr71 can you send please ??

                      Thanks.

                      [email protected]

                      Comment


                      • #12
                        hi geo

                        thanks for your file
                        i openned it
                        but i require that a pcb which must be one route
                        your files pcb is double route
                        please if you have send it me
                        thank you
                        and sorry my english about bad

                        Comment


                        • #13
                          Thank you for the file.
                          It only has a problem is that I do not to print pcb.

                          Comment


                          • #14
                            Hi. Ismail.Sorry but i have not one route PCB for XR71. Why you dont construct a double route pcb?

                            Victor. To print the PCB you must open the file with Protel 99SE

                            Have a nice Day

                            Comment


                            • #15
                              thank you geo
                              i cant find a double board for it
                              thanks for connection
                              but if you can convert it to one route
                              please send it me again
                              have a nice day all

                              Comment

                              Working...
                              X