Announcement

Collapse
No announcement yet.

New article on Induction

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • New article on Induction

    After a long dry spell of no new articles posted on Geotech, I've just added one that explains induction basics and eddy currents. See All About Induction on the Metal Detector -> Info page.

  • #2
    Thanks

    Originally posted by Carl-NC
    After a long dry spell of no new articles posted on Geotech, I've just added one that explains induction basics and eddy currents. See All About Induction on the Metal Detector -> Info page.
    Excellent article -- thanks.

    EC

    Comment


    • #3
      That is a great article Carl!

      I'd like to see more like it!

      Comment


      • #4
        Enjoyed the read, hey, are you Carl Mooreland? I may have your last name spelled wrong, if you are you wrote some very entertaining articles for Western and Eastern some years ago and they were abruptly stopped when multi-frequency was mentioned, I always wondered why, maybe the manufacturers didn't want any stepping on toes. If you are not, I still would like to hear why the write-ups were stopped. There seem to be a lot of Mikes interested in metal detecting.
        Steve(in MS)

        Comment


        • #5
          Hi Steve,

          Yes, I'm Carl Moreland. The last article I wrote for "Tech Talk" was on multi-frequency technology. It was supposed to be a 2-part article. W&ET published the first part, but once that issue hit the stands they told me that would be my last article.

          Here's the odd part... there is a couple months lead time for publishing each issue, so when they cut me loose I had already written and submitted the second part of the multifrequency article. Also, they paid me a small amount (certainly not enough to make it worth my while) for each article. However, the magazine refused to publish Part 2, even though I told them it was free, they didn't have to pay me a dime for it. I didn't want to leave the topic just hanging in mid-air.

          Oh well, I guess I stepped on some toes, though I intentionally tried not to.

          - Carl

          P.S. -- the Induction article is a re-write of one of my columns. Coils is next.

          Comment


          • #6
            Hi Carl,
            Since you did write the 2nd part of part, I sure would like to read it plus it would be great if you would include the first part of it too somewhere on this website if that is allowed. I bet everyone else would enjoy it as well.
            Steve(in MS)

            Comment


            • #7
              I plan to rewrite it as a new article. I'll do it as soon as the Coils article is done.

              Comment


              • #8
                Good!


                Very good! Condensed,straight....I prefer those kind of explanations.
                Carl you should keep this going on.
                regards

                Comment

                Working...
                X