If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I need assistance in spotting the terminals of each of the 3 amplifiers on the CA3035 schematic. Each amplifier has five terminals: 2 inputs, V+, V-, 1 output. I couldn't spot all of them; the schematic is confusing.
The CA3035 is not an opamp, it is an amplifier with 3 gain stages. Pins are:
Stage 1 in/out = 1/3
Stage 2 in/out = 4/5
Stage 3 in/out = 6/7
VCC = 9
GND = 2,8
Fig 2 of the data sheet shows how the stages can be connected.
Tweet
Comment