Multi-purpose device!

[ivconic]

This is based on the magnetometry. = And gold is causing magnetic field distortion ,
All relevant information will be received by the buyer after payment = you need better demonstration than on video on post 1, for example coin or something similar detection from distance 1m, to attract investors.

So far no one of linked videos are convicting. You need to show what it does not how is working.

Post #12 remains the only answer to everything else you will write.

[Detectorist#1]

Hi pito,
You are right - we need more good demonstration - like recovering of the coin from 1m distance (also in real environment - not at air)

[Detectorist#1]

O.K. ivconic,

The future will points the true. I wish you big success with this strange ( at first look) device!

[ivconic]

O.K. ivconic,

The future will points the true. I wish you big success with this strange ( at first look) device!

[pito]

we need more good demonstration = not we but he, if you watch my videos you can see what my device does without disclosing haw is done.

[ivconic]

[Detectorist#1]

We don't need the schematics, nor the software code!

[ivconic]

We don't need the schematics, nor the software code!

I'm not made of stone, I have to give in!
Ok, only this time I will give only one info!
The magnetometer accessory (horizontal part) has 4x FLC-100 type sensors in it.
It works very precisely and realistically.
And that's what drew me to the whole story.
Since 2018, I have my magnetometer project. I have been dealing with this topic since 2004/5.
I really like the 4 sensor setup. It makes a lot of sense. And "some interesting things happen there"!
Perhaps I will devote this coming winter to developing my 4-sensor magnetometer.
It's hard to plan in these crazy times. We do not know what the day brings and what the night brings.
But here... enough "material" for further thoughts.

[Detectorist#1]

Success with these efforts!

[ivconic]

[Tanu]

This is not LRL. This is based on the magnetometry. That's all I will say about it.
Not a joke at all.

Hello ivonic
But you mention video As shown it has LRL mode?

[profesor]

I'm not made of stone, I have to give in!
Ok, only this time I will give only one info!
The magnetometer accessory (horizontal part) has 4x FLC-100 type sensors in it.
It works very precisely and realistically.
And that's what drew me to the whole story.
Since 2018, I have my magnetometer project. I have been dealing with this topic since 2004/5.
I really like the 4 sensor setup. It makes a lot of sense. And "some interesting things happen there"!
Perhaps I will devote this coming winter to developing my 4-sensor magnetometer.
It's hard to plan in these crazy times. We do not know what the day brings and what the night brings.
But here... enough "material" for further thoughts.

The original device mentions a 3km range.
I guess this is not for magnetometers.
These types of devices are on the market. Magnetometers are good for ferro metals. Are they sensitive to non-ferro metals as well?

[Detectorist#1]

Have something strange in this topic, but ivconic is old dog in metal detecting. Let give him a time for finishing this work!

[pito]

The original device mentions a 3km range. = they wish, they even can not demonstrate 5m range.

I think I contacted them a few years ago, they praised the product very much, but when I asked for a video showing how far they can detect a nail, they went silent.

The detection range depends on the sizes/weights of the targets. As claimed by Geometrics for G-882 Marine Magnetometer:

Ship 1000 tons: 0.5 to 1 nT at 800 ft (244 m)
Anchor 20 tons: 0.8 to 1.25 nT at 400 ft (120 m)
Automobile: 1 to 2 nT at 100 ft (30 m)
Light Aircraft: 0.5 to 2 nT at 40 ft (12 m)
Pipeline (12 inch): 1 to 2 nT at 200 ft (60 m)
Pipeline (6 inch): 1 to 2 nT at 100 ft (30 m )
100 kg of iron: 1 to 2 nT at 50 ft (15 m)
100 lbs of iron: 0.5 to 1 nT at 30 ft (9 m)
10 lbs of iron: 0.5 to 1 nT at 20 ft (6 m)
1 lb of iron: 0.5 to 1 nT at 10 ft (3 m)
Screwdriver 5 inch: 0.5 to 2 nT at 12 ft (4 m)
1000 lb bomb: 1 to 5 nT at 100 ft (30 m)
500 lb bomb: 0.5 to 5 nT at 50 ft (16 m )
Grenade: 0.5 to 2 nT at 10 ft (3 m )
20 mm shell: 0.5 to 2 nT at 5 ft (1.8 m)

[Detectorist#1]

And all this data is only for ferromagnetic targets