Announcement

Collapse
No announcement yet.

TESORO GOLDEN SABRE

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Originally posted by siimkuningas View Post
    Is it possible to discriminate bigger pieces of aluminium?
    Not really. If you discriminate large aluminum almost all other targets will be discriminated out also.

    Comment


    • thanks for answer. finished my tgsl some weeks ago. This thread made it possible. works pretty well with fm transmitter. Was a nice puzzle to solve for a person who bought his first multimeter 2 months ago.
      Picture before coil sanding and some other small "still need to do"-s http://www.upload.ee/image/4878141/DSC06058.JPG

      Comment


      • Originally posted by siimkuningas View Post
        thanks for answer. finished my tgsl some weeks ago. This thread made it possible. works pretty well with fm transmitter. Was a nice puzzle to solve for a person who bought his first multimeter 2 months ago.
        Picture before coil sanding and some other small "still need to do"-s http://www.upload.ee/image/4878141/DSC06058.JPG

        Good job. Well done.


        What did you use for a stem.

        Comment


        • Wooden stick, i had one that fits right into crutch and PVC pipe. Coil is connected to pvc, so length is adjustable. Pretty well balanced, i can hold it with just 2 fingers near fm transmitter and angle stays right.

          Comment


          • can you show the video of TGSL with FM transmitter
            its look fun

            Comment


            • I can do that(edit:tomorrow), but coil is still not finished.(sanding and need to bring mV down by 2) Living in a city, tools and workrooms at countryside.

              Comment


              • https://www.youtube.com/watch?v=YDDo...ature=youtu.be Not the best video but still something . Plug in any car fm transmitter(this one was 9euro in local shop) and works. Yellow numbers are my lithium over discharge protection Have to check it from time to time. Easy to fully charge as many batteries as you can carry or buy and take them with you.Got those green ones from makita drill battery. Had to build charger also. There is very slighty hearable continuous noise in sound, nothing serious. (must be set as mono or you can hear whistle, not loud tho).No delay in sound. But i can say my metal detector has a remote!!

                Comment


                • nice but i think better you try go outside in land and test stable or not
                  cos i hear sound when you touch the handle

                  Comment


                  • Steel box is really not good environment for metal detector. You should hear what happens in kitchen, nonstop screaming outside i can play baseball with it and tell you if there was any metal inside the ball.

                    Comment


                    • hi all

                      c'est la premiere fois que je vais realiser une bobine vlf . je vous prie tous de bieb vouloir m'aider vraiment je n'est aucune idée

                      merci a tous

                      Comment


                      • Originally posted by pigeon View Post
                        hi all

                        c'est la premiere fois que je vais realiser une bobine vlf . je vous prie tous de bieb vouloir m'aider vraiment je n'est aucune idée

                        merci a tous
                        Please read the forum rules, and make your posts in English.
                        Basic Rules of the Forums

                        Comment


                        • Originally posted by pigeon View Post
                          hi all

                          c'est la premiere fois que je vais realiser une bobine vlf . je vous prie tous de bieb vouloir m'aider vraiment je n'est aucune idée

                          merci a tous
                          What Google translate say:

                          hi all

                          this is the first time I manufacture a VLF coil. I beg of you all to kindly help me, cause I really do not know how to do

                          thank you all

                          Comment


                          • Thank you WM6
                            Originally posted by WM6 View Post
                            What Google translate say:

                            hi all

                            this is the first time I manufacture a VLF coil. I beg of you all to kindly help me, cause I really do not know how to do

                            thank you all

                            Comment


                            • Originally posted by pigeon View Post
                              Thank you WM6
                              info on coil here

                              Comment


                              • this is my video before i sell it hahahaha

                                Comment

                                Working...
                                X