TESORO LOBO SCHEMATICS

[nelson]

Hi, does anyone have Tesoro Lobo schematics?

Regards

Nelson

[Max]

Enjoy

[nelson]

Hi Max and thanks for sending Tesoro Lobo schematic.
Do you have the pcb for this and list of componentes, cause some of them are not so clear.?

Regards and thanks

Nelson

Enjoy

[kt315]

hi Max, maybe you have yet schematic on TOLTEC? that attached seems very stumped...

[Max]

hi Max, maybe you have yet schematic on TOLTEC? that attached seems very stumped...

Hi,
sorry I haven't toltec (...well I'm not totally sure of that cause of the mess in which I put the various stuff... have at least 20 cd/dvd of various electronic stuff and not just one for metal detectors , big problem when have to find something, anyway).

If I'll recover it somewhere I'll post here.

Kind regards,
Max

[Max]

Hi Max and thanks for sending Tesoro Lobo schematic.
Do you have the pcb for this and list of componentes, cause some of them are not so clear.?

Regards and thanks

Nelson

Hi,
no just schematic of Lobo, I have Eldorado's PCB stuff but don't know if there are errors.

Best regards,
Max

[detectoman]

have anyone diagram of discovery 717? blue, whit antens? i nedd for repair one my cap and resistences lost

thanks very much

detectoman

[FOMA]

I want to do the detector LOBO. I have done the printed charge (much SMD). If possible photography old LOBO (the panel of management).
Want to hear the features of the sensor for LOBO.
the diameter Rx=? , inductance Rx=?
the diameter Tx=? , inductance Tx=?

[Max]

I want to do the detector LOBO. I have done the printed charge (much SMD). If possible photography old LOBO (the panel of management).
Want to hear the features of the sensor for LOBO.
the diameter Rx=? , inductance Rx=?
the diameter Tx=? , inductance Tx=?

Hi,

look here for coils data of some...of them.

http://geotech.thunting.com/cgi-bin/...oils/index.dat

Kind regards,
Max

[FOMA]

Lobo 5x109.93mH50.5------1.33mH10.97------Lobo 8x1510.52mH62.8------1.37mH13.13

This drawing correct?
Why so small L (Rx)?
Can be this wrong?

[Max]

Lobo 5x109.93mH50.5------1.33mH10.97------Lobo 8x1510.52mH62.8------1.37mH13.13

This drawing correct?
Why so small L (Rx)?
Can be this wrong?

Hi,
the a x b dimensions are for oval coils by Tesoro... so it's elliptical 5''x10''.

In the picture you'll see a lobo ST with one of these coils mounted.

But values are good also if you wanna make round concentric... just you have to suit inductances and resistances of coils there... so find the exact numbers of turns.

Best regards,
Max

[ivconic]

Hey Foma, i cant open your .lay files. I do have Sprint Layout 4.0 installed on my pc. But can not find version 5.0...
Are your files made in Sprint Layout 4.0 or some other software?
If yes than can you convert those for older version?
Or to post here .bmp's or .jpg's of those?
Regards!

[ivconic]

Same with eldorado.lay...
BTW what are your experiences with Eldorado?
Can you compare W.Lahr's schematic of Eldorado posted on this forum with your working schematic?
I made Eldorado according that schematic and it is not working good at all.
First i had doubts my pcb is inaccurate,later others checked it and founded no mistake according schematic.
So i am thinkikng now to send it to hell, but first i would like to know your opinion on this..
Regards!

[aft_72005]

Hi ivconic
You need install sprint layout 5 on your computer .
see PCB Freeware or shareware thread at this link
:https://www.geotech1.com/thuntings/s...ad.php?t=11458
post#14.
Regards.

[aft_72005]

Hi Foma
Also I interest to know about your experience with lobo .
How distance can detect coin with 2cm diameter in air ?
Regards.