Announcement
Collapse
No announcement yet.
Help me identify transistor
Collapse
X
-
try to analyze with a DMM for P-N-P junctions like reverse/forward junctons, then try to check with oscilloscope using low power supplies, then try to replace with a good transistor, the number need not be same u can replace with any general purpose transistor depending on oscilloscope trace....
U seem to be confused with the words "...... it's a transistor cos there is several like this IC...."
If u post the picture of it its good, someone can help u. try to debug the waveforms at the transistor with transistor on the working board
-
thanks }]:
http://www.tkb-4u.com/code/smdcode/smdcodeA.php
i found interesting site with smd markings
Comment
Comment