Tweet
Careful Diodes Resistors
Does the By407A in EE Treasure Hunter and EE2 has to be 3 amps??? Can we use a 300Volts break at 1Amp ???
Hammerhead has just 1N4148 which is 100ma what are the numerics for this and above...
And the MFR damping resistor element break is 200-400 across the coil , no idea what u people are using, if the coil flyback goes more than 600V (during transmit Pulse width) , this is a great concern.
This device parameters are more complicated than an avionics radar or any other micro controller circuit in the world....complications in comparision to air borne Vs deep search one, the type of noise factors etc etc
Hammerhead has just 1N4148 which is 100ma what are the numerics for this and above...
And the MFR damping resistor element break is 200-400 across the coil , no idea what u people are using, if the coil flyback goes more than 600V (during transmit Pulse width) , this is a great concern.
This device parameters are more complicated than an avionics radar or any other micro controller circuit in the world....complications in comparision to air borne Vs deep search one, the type of noise factors etc etc