Can you Identify this Bounty Hunter Model?

[mike.hickman]

Hello folks
I recently purchased this bounty hunter metal detector but am unable to determine which model it is in order to locate a users manual. The faceplate is missing around the LCD screen. It has 2 dial buttons and 4 push buttons.
The Patents listed are:
4470015
4677384
4300097

The picture can be seen at:
http://picasaweb.google.com/mike.hic...7/BountyHunter

If you can identify this model and tell me where I can download a manual for it I would greatly apreciate it. The folks who made it were of no help at all.

Thanks for your help.
Mike

[Joe(TX)]

ORIGINAL QUICKDRAW??

Mike, I'm 90% sure that it is a an original Quickdraw! (Not the QuickDraw 2 which is currently in production!) Missing the faceplate throws off most person's ability to identify this model! It is housed in the Bid Bud housing and I believe that this was 1st Texas, first or 2nd model after they took over the controls from Teknetics! So it is at least 15 years old!...............Good Luck .............Joe

[mike.hickman]

Thank Joe!!
Now if I can locate a manual for it, I can make my own faceplate. I don't think I went wrong for $20.

Mike