Best homemade PI detector

[ivconic]

Ha,ha,ha! Splendid job KT315!

I guess something is wrong with my humor, cose you didnt understood it again?
Anyway...you will agree with my claim; when i said i measured 450Hz at TR2 and stated that 450Hz is working frequency of that device? Would you?
So 450Hz is working frequency? Right?
Usually i do adjust DP to work between 90 and 120Hz, but once i experimented with small coils and higher working frequencies. It was mentioned at 450Hz.
Whatever....never mind. Many ways to explain same thing.
Cheers!

[nelson]

Hi my friend
Plase can you tell me if your DVD containAquapulse AQ1B? I need this to fix my detector
If so, please give me full instructions to pay you by pay pal.
Regards
Nelson

[kt315]

Ha,ha,ha! Splendid job KT315!

I guess something is wrong with my humor, cose you didnt understood it again?
Anyway...you will agree with my claim; when i said i measured 450Hz at TR2 and stated that 450Hz is working frequency of that device? Would you?
So 450Hz is working frequency? Right?
Usually i do adjust DP to work between 90 and 120Hz, but once i experimented with small coils and higher working frequencies. It was mentioned at 450Hz.
Whatever....never mind. Many ways to explain same thing.
Cheers!

shame on you Ivikakonik! you are only noising, as always. this forum is a toy for you ((( you are not be sirious everytime.
450 hz is 900 PPS. ASK ERIC FOSTER he will give you bunt!

RTFM! read ITMD!!!!!

[mohandes]

Hi,
yes, I made it on protoboards stuff... etc... the schematics is somewhere here but I forget where exactly, you could try with a simple search.

I have made using original schematic by Alexis, but have this pdf file with the PCB design too.

Kind regards,
Max

thanks max
very well.

[nelson]

Hi my friend kt315
Plase can you tell me if your DVD has Aquapulse AQ1B? I need this to fix my detector
If so, please give me full instructions to pay you by pay pal and if not I will also like to have your DVD.
Regards
Nelson

[kt315]

Nelson, I subscribed you to gmail ROUND CIRCLE OF FRIENDS. I am aka JOHN S. there.

[kt315]

Nelson, you see my right hand now in what it state (( but i am ready to help you...

[walkman]

Hi kt315 Friend;

I want to buy your DVD. How to get? Regards

[Davor]

Nelson, you see my right hand now in what it state (( but i am ready to help you...

You seem to be using your middle finger far too often

[ivconic]

You seem to be using your middle finger far too often

... picking nose all the time!
Pardon! Mining all the time... actually!

[kt315]

one buddy has noticed me that the finger is fixed in position of **** *** ))

walkman write me into [email protected]

[ivconic]

one buddy has noticed me that the finger is fixed in position of **** *** ))

walkman write me into [email protected]

Everybody sees what's on his mind.
I see "nose mining tool", if you ask me.

[nelson]

Wow, so bad injury.
I hope you get well soon my friend
About your DVD, let me know again how to get a copy, cause i lost in my computer your paypal account.
Regards and get well sonn
Nelson

[mohandes]

Hi,
yes, I made it on protoboards stuff... etc... the schematics is somewhere here but I forget where exactly, you could try with a simple search.

I have made using original schematic by Alexis, but have this pdf file with the PCB design too.

Kind regards,
Max

hi max
this is a correct pcb and... ??

MY friends and GURUS , M Kt315 and Mr ivonic
please finish your problem and i thinks both are right say about frequency ( thinking is ok ) and it is not very important but respect and friendship more bigger than.
so if it is possible finish it.try to forget this and become again good friends together.
regards

[ivconic]

There is no problem at all, just jokes and humor from time to time.
It's good to lighten up a bit these topics occasionally and make short break from arid narrations and high profound debates.
Annoyance is our worst enemy here, i tell ya!